Here’s what you better know about the issue and how to fix it.
What Is the WHEA Uncorrectable Error?
What Causes a WHEA Uncorrectable Error?
From faulty hard drives to defective CPUs, just about anything inside your PC could be the culprit.
Run Chkdsk
The first thing you should do after encountering the WHEA Uncorrectable Error is runChkdsk.
From there, navigate to the “Tools” tab and snag the “Check” button.
This will scan the drive for errors and report back any issues.
Chkdsk may even be able to solve the problem for you.
Toupdate your drivers, search for “gear Manager” in the Start Menu.
Next, right-hit the equipment you’d like to update and select “Update Driver.”
you’re free to then have Windows perform the update automatically or browse your PC for drivers.
Then, use the “Browse My Computer for Drivers” option.
If you’re using a laptop, try checking the bottom of the gadget for these screws.
In any case, be sure you’re using an antistatic wrist strap toavoid damaging components.
Specific steps will vary by model, so consult your manual if needed.
With any luck, you’ll find something that’s noticeably out of place.
Replace damaged components and refit connections, and you might just fix the WHEA error.
Check Your RAM for Errors
The WHEA error can appear thanks to issues with your RAM.
Search for “Windows Memory Diagnostic” in the Start Menu and press Enter to get the process underway.
Remove New Hardware
Did you add anything new to your PC recently, like ahard driveorGPU?
If so, that addition could be to blame for the WHEA Uncorrectable Error.
Try uninstalling the new hardware and check to see if the error stops appearing.
Considerresetting your BIOSif none of the above options have worked.
Boot your setup again and see if the WHEA error goes away.
Restore Your System
System Restoreessentially rolls back the clock on your PC.
Reset Windows 10
Resetting Windowsis your last resort.
This will wipe everything on your PC and return it to its original options.
However, it’ll also remove your WHEA Uncorrectable Error if it was sparked by software.
From the options menu, choose the “Security & Updates” option.
Next, select “Recovery” and then “Reset This PC” to get started.
Related:How to Fix Error Code 0x80004005 on Windows 10 and 11
