However, it recently launched a new product that is quite differenttheNanoleaf 4D Screen Mirror + Lightstrip Kit.
The Nanoleaf 4D Screen Mirror + Lightstrip Kit is designed to produce dynamic light effects behind smart televisions.
The light it emits reflects the colors on the screen, creating an immersive experience in some conditions.
However, the setup process can be a bit challenging and requires patience.
Once installed, the light strip can emit colors that synchronize with whats being displayed on the screen.
It also functions in similar ways to other Nanoleaf products.
The only difference here is the length of the light strip.
Beyond the strip, the product box contains a controller, camera, mounts, and brackets.
Its recommended to give yourself plenty of space for moving around.
Bryan M. Wolfe / How-To Geek
check that that you press firmly on the entire strip for maximum adhesion.
The corner brackets make the installation process more accessible and add extra security.
When doing so, avoid cutting into any of the LED lights.
The Nanoleaf 4D Screen Mirror + Lightstrip Kit is a unique lighting product that can be used with your smart TV. Once installed, the light strip can emit colors that synchronize with what’s being displayed on the screen. It also functions in similar ways to other Nanoleaf products.
Once cut, the strip cannot be connected back together.
Your next step is to connect the light strips USB-C to the controller.
Positioning the camera is the biggest challenge with installing the Nanoleaf 4D Screen Mirror + Lightstrip Kit.
Bryan M. Wolfe / How-To Geek
The camera is necessary so that the light strip can react to whats happening on the screen.
After installing the camera, connect its power cord to the controller.
Place the controller behind the TV and plug it into a power outlet.
Bryan M. Wolfe / How-To Geek
Heres where things get a little bit goofy.
The next step is to pair the light strip with the Nanoleaf app foriPhoneorAndroid.
You do so by following the installation steps within the app.
Nanoleaf
Once the lights get paired, youll need to calibrate the camera with your TV.
The app will show a video of the TV screen on your smartphone to assist with this process.
The setup process for Sync+ is quite simple and is handled using the Nanoleaf app.
Bryan M. Wolfe / How-To Geek
All you have to do is use the app to tell it where the panels are on your TV.
The lights duplicated the colors accurately in each direction.
you might perform numerous tasks with the app, which is available for mobile and desktop.
Bryan M. Wolfe / How-To Geek
These lights can even react to the beat of the music in a room, which is fantastic.
Even here, Nanoleaf offers varying degrees of immersion.
Switching between modes is as simple as tapping a button in the app.
The second 2D mode identifies the most dominant colors on the screen and intermixes them with white light.
Its a perfect mode for someone who wants less immersion.
In both modes, the lights move in unison on all four sides of the TV.
I must admit, the 4D mode stood out to me the most.
It added a vibrant and immersive experience.
In fact, they seemed to distract me from what was happening on the screen.
Extras: What Else Can the Lights Do?
Which, in turn, takes away the immersive experience.
Regardless, its clever, and indeed many will like it.
Unfortunately, smart devices sometimes get hacked, so something like this is good for peace of mind.
Best of all, its price is much lower than other Nanoleaf solutions, which tend to be expensive.
It starts at $99.99.
However, a few things stand out that are holding it back.
However, the team at Nanoleaf needs to improve this so its easier to use.
Removing the app crashing would also be helpful!
The same goes for the position of other lights using Sync+.
Again, this sounds like an issue with the Nanoleaf app, not the lights themselves.
And then theres the camera hardware.
Its unavoidable with this product, and Im not sure theres a solution to this.
The camera itself is beautifully designed and, because it is black, somewhat blends into the background.
And yet, its still noticeable, especially when the TV isnt in use.
For now, you either need to embrace or not buy it.
Should You Buy the Nanoleaf 4D Screen Mirror + Lightstrip Kit?
TheNanoleaf 4D Screen Mirror + Lightstrip Kitis a new and innovative way to enhance the viewing experience.
While it is not without its flaws, it is definitely worth considering.
The product is priced competitively and functions as expected despite a slightly frustrating setup process.
It also integrates seamlessly with your existing Nanoleaf panels.
