However, WHS 2011 removed some key features.
If you’re looking for an upgrade without losing features, look no further than Amahi.
So confirm you only have the hard drive you want plugged in.
Picture viaJustin Ruckman
Once the correct hard drive is plugged in, boot the system from the installation CD.
Once logged in you will be brought to your control panel.
After the initial drive format and file copy finishes, put in the install code when prompted.
After it’s complete your new HDA should automatically reboot and bring to you a login screen.
The system will finish the HDA configuration and reboot into the final usable state.
These only apply if you are moving the HDA to a new machine.
initiate the following command from the terminal.
The next time your system boots, the wired ethernet adapter will automatically be reconfigured by the system.
Shutdown the machine and pull out the hard drive.
